Stratophase

CWDM Grating Array

 Applications 

  • Accurate transmission notch filters
  • Reflection filters
  • Tunable filters
  • Diode laser stabilization

Schematic of CWDM chipStratophase patented technology – Direct Grating Writing – allows planar Bragg gratings covering the entire ITU wavelength grid (1271 to 1611nm) to be defined in a single process. This technique uses a rapid, single-step fabrication process directly resulting in low cost, high-density planar Bragg grating devices.

The silica based planar devices feature arrays of channel devices suitable for multiple applications and compatible with bulk optics and fiber technology. Each 10mm wide chip consists of an array of channel waveguides fabricated from silica on a silicon substrate. The silicon substrate provides a thermally conductive and mechanically flat base for device stability. The channel waveguide is buried, with over and underclad layers isolating the waveguides from the environment. Each waveguide has a specific Bragg grating, that can be utilized in both transmission and reflection modes of operation, and corresponds to a channel within the CWDM grid. Each sample is end polished allowing straightforward fiber launch into the waveguides.

Chips are mounted within a clip designed for use with the Stratophase oven and temperature controller system for rapid mounting and uniform thermal control. When operated between 30°C and 100°C, these two devices provide Bragg gratings over the entire C band and can be tuned to any C-band channel on the 100, 50, 25 and 12.5GHz ITU grids.

Features

CWDM wavelength listSpecifications

For Further information on this product please contact Stratophase.

Stratophase Ltd | Tel. +44 (0)1794 511226 | Fax. +44 (0)8704 580754 | email: enquiries@stratophase.com