Stratophase

DWDM Grating Array

 Applications 

  • Accurate transmission notch filters
  • Reflection filters
  • Tuneable filters
  • Diode laser stabilization
  • Laboratory stock Bragg gratings

Mounted Bragg grating deviceThis silica-on-silicon UV written chip contains an array of Bragg gratings, suitable for experiments in a DWDM laboratory. The device is manufactured using Direct Grating Writing, which enables fabrication of Bragg gratings with precise control over the grating period and structure. This in turn removes the need for custom phase masks for each design of Bragg grating and produces cost effective integrated optical Bragg gratings.

Each 10mm wide chip consists of an array of channel waveguides, in a three-layer silica-on-silicon platform. The silicon substrate provides a thermally conductive and mechanically flat base for device stability. The channel waveguides are buried, with over and underclad layers isolating the waveguides from the environment. Each sample is end polished on both the input and exit facets allowing straightforward launch into the waveguide. 

The device is mounted within a clip designed for use with the PPLN oven and controller system for rapid mounting and uniform thermal control. Each device consists of 25 single mode channel waveguides, each containing a Bragg grating that can be used in both reflection and transmission modes. The grating wavelengths are separated by 100GHz channel spacing and can be thermally tuned to the precise desired wavelength. When operated between 30°C and 100°C these two devices provide gratings over the entire C band and can be tuned to any C band channel on the 100, 50, 25 and 12.5GHz ITU grids.

DWDM chip layoutFeatures

Specifications

For Further information on this product please contact Stratophase

Stratophase Ltd | Tel. +44 (0)1794 511226 | Fax. +44 (0)8704 580754 | email: enquiries@stratophase.com